Sanifloor®
Designed specifically where floor drainage is required but where space underneath is very limited e.g. wet rooms. This two part kit with a powerful shower waste pump and a choice of three waste designs can pump up to 3m vertically as well as 30m horizontally. Higher flow rate means it can be used with powerful ‘rain head’ showers.
Why choose this product?
- Suits wet rooms and low level shower trays
- Ideal for high flow applications
- Pump and waste inlet can be up to 3m apart horizontally
- Dual function – sucks waste up from the gully and pumps waste water away up to 3m vertically or 30m horizontally
- Pump can be sited up to 300mm above the gully
- All gully types are 90mm in diameter

Saniflo approved engineers – Sales – Service – Spares – Repairs
Call PumpMaster on 0800 2922 542
Saniflo Motor | induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles. |
Watts (Consumption) | 400w |
Electrical Supply | 220-240V 50Hz |
Flow rate at max head litres/min | 40 |
Horizontal Discharge | Max 30/20/10 metres |
Vertical Discharge | 1/2/3 metres |
Gravity fall on horizontal installations | 1:100 |
Discharge Pipe Diameter | 32mm |
Materials | Polypropylene, C.R.P., stainless steel, Neoprene |
Type of WC Pan (not included) | n/a |
Motor RPM | 2800 RPM |
Dimensions (vertical height is measured from floor level) | (W)164mm x (H)191mm x (D)291mm |
Technote – Saniflo recommend a Saniflo approved engineer for every Sanishower installation, repair, and service – phone PumpMaster on 0800 2922 542 | Sanishower will pump away the waste from showers discharging up to 15 litres per minute |
All items in stock for immediate delivery